When you search for a super clone of the Audemars Piguet Code 11.59 reference 45100, the first thing to check is the movement. A genuine 11.59 chronograph uses an integrated column-wheel chronograph with a vertical clutch. A top-tier replica must copy that layout. If the watch uses a standard Valjoux 7750, the subdials will sit in the wrong place and the case will be too thick. Look for a clone that matches the 41mm diameter and about 12.6mm thickness of the original. That is the baseline for a super clone.

best replica audemars piguet codes 11 45100

What to Look For

Beyond the movement, you need to inspect the case, dial, and bracelet. The Code 11.59 has an octagonal case middle, a round bezel, and a mix of brushed and polished surfaces. A good replica will capture these transitions without sharp edges or uneven brushing. The bracelet should taper from the lugs and have correct end links that fit flush.

replica audemars piguet codes 11 45100 for sale

Movement and Function

The best super clones use a dedicated clone of the AP caliber 4401. This movement has the correct subdial positions: 30-minute counter at 3 o'clock, 12-hour counter at 6 o'clock, and small seconds at 9 o'clock. The date sits at 4:30. If the date is at 3 o'clock or the subdials are at 12, 6, and 9, the watch is not a super clone. Also check the rotor: it should have correct engraving and a skeletonized design.

replica audemars piguet codes 11 45100 for sale

Case and Bracelet

Measure the thickness. A 7750-based replica often adds 1.5mm or more. The genuine is about 12.6mm thick. The case should have a polished bezel and a brushed octagonal middle. The crown and pushers should align with the case band. The bracelet should have a mix of brushed and polished links, and the clasp should have a clean engraving.

Code 11.59 45100 Replica Price: Buying Guide

Dial and Hands

The dial of the Code 11.59 chronograph has a stamped pattern and an openworked design. The applied AP logo should be crisp and correctly placed. The hands are faceted and polished, with a long central chronograph hand. The subdial rings should have a snailed finish. Check the date wheel: the font should match the original, and the window should have a beveled edge.

Parameter Bands

Super clones come in different quality tiers. Entry-level replicas use a 7750 with a decorated rotor and have wrong subdial spacing. Mid-tier replicas use a modified 7750 with correct subdial positions but still add thickness. Top-tier replicas use a dedicated clone movement and match the genuine dimensions within 0.5mm. The best ones also use sapphire crystal with correct anti-reflective coating and a display caseback with correct engravings.

Pitfalls to Avoid

  • Wrong subdial positions: the most common flaw on cheap replicas.
  • Excessive thickness: if the watch sits too high on the wrist, it is not a super clone.
  • Poor date font and position: the date should be at 4:30 with a correct font.
  • Low-quality engraving on the caseback and clasp.
  • Hands that are too short or lack facets.

FAQ

Can a super clone pass as genuine? Not to a trained eye, but a top-tier clone can fool most people at a glance.

What movement should I look for? A dedicated clone of the AP 4401 is best. A modified 7750 with correct subdial positions is acceptable but thicker.

How do I spot a low-quality replica? Check the subdial positions, thickness, and date window. If any of these are off, it is not a super clone.