A Planet Ocean Ultra Deep replica commonly lists between about $130 and $600, and the version worth buying, a clone automatic with a decorated movement, a titanium-finish case and a ceramic bezel insert, sits near $320 to $450. That is what the model costs to copy well, since the genuine Ultra Deep has a 45.5 mm case, a domed sapphire crystal and a 6,000 m depth rating that a cheap case cannot pass off. The criteria that move the price most are the movement, the case material and finishing, the bezel insert, the crystal and its anti-reflective coating, and the dial printing and lume.
Replica Omega Planet Ocean Ultra Deep Ceramic Dial Guide
Figures below are asking prices seen across replica listings, not quotes from a single seller. Factory batches, exchange rates and availability shift them by $50 or more either way.
where to buy a replica omega planet ocean ultra deep
Price tiers at a glance
- Budget, $60 to $130: quartz or low-grade automatic, mineral glass, printed or aluminum bezel insert, steel case with a titanium-colored coating. Caseback engraving is shallow and the depth rating is decorative.
- Mid tier, $130 to $260: 21-jewel automatic (often a Miyota or Seagull copy), sapphire or hardened mineral crystal, cleaner dial print, lume that fades within an hour.
- Clone tier, $300 to $500: decorated clone movement with an engraved rotor, grade 5 titanium or a well-finished steel case, ceramic bezel insert, double AR sapphire, applied markers and correct dial text spacing.
- Top tier, $500 to $800: Swiss ETA 2824 or a high-grade clone, laser-etched caseback, domed sapphire with inner AR, real titanium, and lug and crown-guard geometry that matches the original.
What drives the price
Movement
A quartz version costs the maker a few dollars. A decorated automatic clone with a working rotor, engraved bridges and a 40-hour reserve costs far more, and it is the single largest line in the price. Ask for a photo of the movement rather than a stock image.
where to buy a replica omega planet ocean ultra deep
Case and finishing
Real grade 5 titanium machines and finishes slowly, so cheap Ultra Deep replicas use 316L steel with a gray coating. The coating wears through at the crown guards and lug edges within months, which is why the titanium versions cost more.
replica omega planet ocean ultra deep for sale
Bezel insert
Ceramic holds a matte to satin sheen and takes crisp engraving. Printed metal looks flat under light and the markings rub off. The insert is one of the first places a low tier gives itself away.
Crystal and coating
Double anti-reflective coating, inside and out, gives the dial a near-invisible glass look. Single or no coating produces a blue or purple glare. The Ultra Deep has a domed crystal, so a poorly shaped dome distorts at the edges.
Dial and lume
Applied indices, sharp text and even spacing between the model name and the depth rating separate the clone tier from the mid tier. Lume quality is harder to judge online, but a photo in a dark room tells you whether it holds.
Which tier fits your use
- Occasional wear, straps swapped often: mid tier, $130 to $260. The price gap to the clone tier buys little that a casual wearer will notice.
- Daily wear, caseback and crown seen up close: clone tier, $300 to $500. This is where the titanium case, ceramic insert and decorated movement all appear together.
- Display or desk diving only: budget tier. Spend the difference on a second strap.
- Swimming or diving: none of them without a pressure test from a watchmaker. A clone gasket set is not a 600 bar rating.
Why the Ultra Deep costs more than a Seamaster Diver 300M replica
Volume. The Diver 300M is one of the most copied watches in the world, so tooling costs spread over thousands of units and the price sits lower. The Ultra Deep is a 45.5 mm watch that many buyers cannot wear comfortably, so fewer factories tool up for it, batches run smaller and the per-unit price rises. The titanium case adds a second cost factor, since steel with a coating is cheaper to produce but looks and feels different in hand.
Before you pay
- Ask which movement is inside and request a real photo of it.
- Confirm the bezel insert material: ceramic or printed metal.
- Check dial text alignment and marker height in a close-up photo.
- Ask whether the crystal has inner AR or only outer AR.
- Confirm the case is titanium or coated steel, and ask about coating thickness.
- Request a pressure test result if you plan to get it wet.
- Use a payment method with buyer protection, since dealers close and reopen under new names.
Legal and practical notes
Replica watches are counterfeits. Importing one into the United States can result in seizure by Customs and Border Protection and a civil penalty. A Swiss Made claim on a replica does not meet the legal definition of that label, which is tied to Swiss movement, assembly and inspection. If the look matters more than the logo, a titanium dive watch from a legitimate microbrand costs about the same as a top-tier replica and arrives with a warranty and serviceable parts.