An Omega 2576 super clone is a high-grade copy of the vintage Omega bumper automatic, built to match the original case size, dial print, and hand set. The 2576 sits in Omega's early 1950s automatic line, so a correct copy measures about 34 to 35 mm across, takes an 18 mm strap, and carries a dial with the same font, logo height, and index shape as the reference it copies. Expect to pay $250 to $600 for the top tier, and use the checks below to sort those from cheap stock.
Two details decide quality on this model. The first is the case profile, since the original has slim lugs and a domed back that most factories flatten. The second is the dial, where a wrong logo or a thick index ruins the look at arm's length.
is omega 2576 replica worth it
What Separates a Super Clone From a Basic Replica?
- Case milling: Super clones cut the case from a CNC block and finish the lugs by hand. Budget copies use cast cases with soft edges and a thicker bezel.
- Dial print: Look for a raised logo with a defined edge and text that sits on one baseline. Pad printing on cheap copies smears under a loupe.
- Hands: Good sets have beveled edges, a polished center, and lume that fills the frame without a gap.
- Crystal: Vintage 2576 watches used a domed acrylic or an early mineral glass. A clone with a flat sapphire changes the side profile.
- Caseback: Engraving depth and the correct reference stamp matter more than a display window.
- Movement finish: Geneva stripes, blued screws, and a rotor cut to look like a bumper weight mark the top tier.
Which Case and Dial Checks Matter Most?
- Measure the case: 34 to 35 mm across, 18 mm between the lugs, and about 10 to 11 mm thick.
- Confirm the crown sits at 3 o'clock and measures about 4 mm with a signed face.
- Compare the dial photo to a known reference photo shot at the same angle. Font weight, index width, and the gap between logo and text should match.
- Ask for a macro shot of the lugs to see the bevel. Soft, rounded edges point to a stamped case.
- Check the inner flange depth. A deep rehaut on a 34 mm case looks wrong next to the original.
- Look at the end link fit on a bracelet version. A 0.5 mm gap reads as a bad build.
What Movement Sits Inside a 2576 Clone?
Most Omega 2576 super clones do not use an original bumper caliber. Factories fit a Miyota 9015 or a Chinese automatic and decorate the rotor to mimic the original weight. Ask for a movement photo before you pay.
A real 2576 rotor swings on two springs and rebounds with a soft thud at each end of its arc. A clone rotor spins a full circle, so the feel on the wrist differs and the caseback sound gives it away.
where can i buy omega 2576 replica
Timing matters more than looks here. Ask for a timegrapher reading, and treat plus or minus 10 seconds a day as a fair target for this price band.
What Does an Omega 2576 Super Clone Cost?
- $120 to $200: entry copies with cast cases, printed dials, and a plain automatic movement.
- $250 to $400: mid tier with a decorated Miyota, a correct dial layout, and a decent crystal dome.
- $450 to $650: top tier with a hand-finished case, the right crystal profile, and a movement plate cut for the bumper look.
Price moves with the strap, the box, and the seller's location. A high price alone does not prove quality, so judge the photos first.
How Do You Spot a Low-Grade Copy?
- A logo that sits too high or too low on the dial
- Index plots with lume that spills over the metal frame
- Mirror-polished case sides where the original has brushed faces
- A rotor that spins free and a caseback that rattles when you shake the watch
- Listings that never show the movement or the caseback
What Should You Ask the Seller Before Paying?
- Can you send a macro photo of the dial and the caseback engraving?
- Which movement is inside, and what is the timegrapher reading?
- What is the exact case diameter and lug width in millimeters?
- Is the crystal acrylic or sapphire, and what is the dome height?
- Do you accept returns, and who pays return shipping?
- Which carrier do you use, and does the price include tracked shipping?
Is Buying a Replica Legal?
Replica watches copy a trademarked design and logo, so customs in the US and the EU can seize them at the border. Buying from a seller inside your own country carries less risk than importing. Never resell a replica as a genuine watch, which counts as fraud in most jurisdictions.
Frequently Asked Questions
Does a 2576 super clone keep good time?
A Miyota-based clone holds about plus or minus 10 to 15 seconds a day when regulated. Vintage originals often run worse than that, so accuracy is not the weak point of a good copy.
Which strap fits a 2576 clone?
An 18 mm strap fits most copies of this reference. Check the lug hole position, since a drilled lug that sits too close to the edge will not take a thick leather strap.
Can a jeweler service a super clone?
Many watchmakers will service a Miyota movement because parts are easy to source. Fewer will touch a decorated clone plate, so ask before you buy.