The short answer
"Replica Pasha 366365" is a seller's stock code for a copy of the Cartier Pasha de Cartier, not a number you can look up in Cartier's own catalog. Genuine Pasha references follow the W-prefix pattern (W31015M7, WSPA0012 and similar), so a bare six-digit code usually comes out of listing software rather than from the brand. The build behind the code is what you are actually buying: case diameter, dial, movement, and bracelet. Get those four specs and the number stops mattering.
What the real Pasha looks like
The Pasha is one of the easier Cartier shapes to identify once you know the cues. A round case. A square track printed inside the dial. Four oversized Arabic numerals. Sword-shaped hands. A crown hidden under a screw-down cap that hangs on a short chain. The lugs are Vendôme style, so the strap or bracelet slides straight into the case with no visible spring bar. The 1985 version, credited to Gérald Genta, is the design nearly every replica copies.
Two current sizes dominate: 35mm and 41mm. Older genuine models ran around 38mm, and the Pasha C line used quartz movements in smaller cases. Knowing which one a seller means by 366365 is the first thing I ask.
Case size and how it wears
A 35mm Pasha reads like a dress watch and sits flat under a cuff. The 41mm version is a different animal. It is thick, it has real wrist presence, and it looks oversized on anybody under about a 6.75 inch wrist. Replica cases are frequently a half-millimeter to a full millimeter off from the genuine spec, so a seller quoting "41mm" may be shipping 41.5mm. Ask for caliper photos if the fit matters to you.
Movement: quartz or automatic
This is where most listings get vague, and it is worth pushing on.
- Quartz. Legitimate for the Pasha C, wrong in a 41mm automatic-style case. The seconds hand ticks once per second.
- Miyota 9015 or a 2824 clone. Common, serviceable, and smooth sweeping. The date flips cleanly near midnight.
- Decorated clone of the Cartier 1847 MC. Looks right through a display back. Accuracy varies more between individual units.
A quartz movement inside a watch advertised as automatic is the single most common mismatch I see in this reference range. Ask for a movement photo with the caseback off.
Finishing details worth checking
Dial printing should be crisp at the numerals and the inner square track. The date window belongs at 4:30 or 3 o'clock depending on the model, and it should not cut into the square track. The crown cap should thread smoothly and hang on a chain that moves freely rather than a stiff stamped piece. On the bracelet, look for screws rather than friction pins, and check that the end links sit flush against the case with no gap.
Water resistance and daily use
Genuine Pasha models are rated to 100 meters on several references. Replicas rarely hold that, even when the caseback stamp says so. Gaskets are the weak point. Treat any replica as splash resistant at best, take it off before swimming, and never trust a printed depth rating on a watch you have not pressure tested yourself.
One practical note
Importing counterfeit trademarked goods into the United States is prohibited, and shipments are subject to seizure by U.S. Customs and Border Protection. That is a real risk attached to the purchase, not a technicality, and it is worth weighing before you order.
Quick checklist
- Confirm actual case diameter, ideally with a photo on calipers.
- Confirm the movement type and ask for a movement photo.
- Check the crown cap threading and chain movement.
- Check dial printing and date window placement.
- Assume no meaningful water resistance.