The pick, up front
Buy the 124060 replica. It is the current no-date Submariner, so the case shape matches what people see on wrists today, and the top factories have put their newest tooling into it. Choose the 114060 instead if your budget tops out below the top tier. That reference has been copied for over a decade, and even mid-range versions get the maxi case and crown guards close to right. A cheap 124060 tends to look worse than a cheap 114060.
What changed between the references
Rolex moved the no-date Sub from 40mm to 41mm in 2020 and retired the 114060. The change reads as small on paper and obvious on the wrist. The lugs got slimmer, the bracelet got wider at the end links, and the crown guards lost some bulk. Everything else, the dial layout, the ceramic bezel, the Glidelock clasp, stayed put.
Replica Rolex 124060 Super Clone Guide: Specs, Tiers, and What to Check
Case and lug measurements
- 114060: 40mm case, 20mm lug width, about 12.7mm thick, wider lugs and a boxier profile
- 124060: 41mm case, 21mm lug width, about 12.4mm thick, tapered lugs and slimmer crown guards
Those numbers drive most of the replica conversation. A 1mm lug width difference changes how the bracelet flows into the case, and the 21mm end link is harder to machine, which is one reason early 124060 copies had visible gaps at the lugs.
replica rolex 124060 super clone
Movement
The genuine 3130 in the 114060 runs at 28,800 vph with a 48-hour reserve. The 3230 in the 124060 uses the Chronergy escapement and runs 70 hours. Neither figure transfers to a replica. Most 124060 copies run a decorated 3130 clone or a 2824 base with an engraved rotor, and real reserve lands near 40 hours either way. What you can check is the beat rate and the sweep. A stuttery second hand at 21,600 vph is a giveaway no case can hide.
Replica Rolex 124060 Ceramic Bezel: Buyer's Inspection Guide
Bracelet and clasp
Both references use an Oyster bracelet with a Glidelock clasp, and both reps copy the clasp well at the top tier. The tell sits at the end links. On the 124060 the bracelet should be 21mm at the lugs and taper to the same clasp width. On the 114060 it starts at 20mm. Some builds pair a 114060 bracelet with a 124060 case, which leaves a step you can feel with a fingernail.
Dial, bezel, and crystal
The layout is identical: crown at 12, no date window, ceramic insert with a 60-minute scale, Chromalight lume that glows blue. The 124060 has a wider dial opening, so the printing has more air around it. Two details separate good reps from great ones. The serif weight on "SUBMARINER" and the depth of the rehaut engraving. Shallow laser etching on the inner ring is the flaw I see most on mid-tier 124060 copies.
Tells worth checking before you buy
- Lug width: 21mm on the 124060, 20mm on the 114060. Measure it, do not trust the listing.
- Crown guard profile: the 124060 guards should sit lower and thinner against the case.
- Bezel action: 120 clicks, firm, no back play. A wobbly insert is a cheap insert.
- Rehaut depth and font alignment, including the etched coronet at 12.
- Hand stack height under the crystal. Mushrooming hands catch light and look flat.
Options by tier
I sort no-date Sub reps into three buckets, because the answer changes with the money.
- Entry tier: pick the 114060. The older case geometry is forgiving, and a decent 114060 at this price beats a weak 124060 every time.
- Mid tier: either works. The 124060 gets you the current look if the lug fit is clean. The 114060 gets you a better bracelet and dial for the same money.
- Top tier: pick the 124060. This is where the 3230-decorated movements, correct 21mm end links, and proper rehaut depth show up. The gap between this and a mid-tier copy is wider than the gap between the two references.
Bottom line
124060 if you are buying at the top and want the current Submariner on your wrist. 114060 if you want the most watch per dollar, or if you are buying online and cannot inspect the lugs first. Both are copied well. The 114060 has had longer to get there.