The Rolex Daytona white dial super clone 116500 is a replica of the 116500LN Panda Daytona. It copies the 40mm steel case, white dial with black subdials, black ceramic bezel, and chronograph layout. Build quality depends on the factory; the best versions use 904L steel, a clone 4130 movement, and a correct hand stack.
What does the 116500 white dial super clone copy?
The reference watch is the steel Daytona that Rolex launched in 2016 with a ceramic bezel. Its white dial has black subdials at 3, 6, and 9 o'clock, a red Daytona line above 6, and a running seconds hand at 6. The clone aims to match those details at arm's length and under a loupe.
- Case: 40mm Oystersteel shape with twisted lugs, crown guards, and screw-down pushers.
- Dial: white base, black subdials, applied baton markers, lume plots, red text, and a metal coronet.
- Bezel: black ceramic with an engraved tachymeter scale and a triangle at 12.
- Bracelet: brushed Oyster bracelet with a folding Oysterlock clasp.
How do you judge build quality on a white dial clone?
Start with the dial because white shows print edges, dust, and subdial finish. Then check the case, bezel, bracelet fit, and movement. A good clone looks right in photos and feels right in hand.
rolex daytona white dial super clone 116500
Dial and subdials
The white dial should be matte, not glossy. Black subdials should have fine concentric rings and crisp white print. The red Daytona text should sit above 6 with even spacing. Look for a correct hand stack: the center hands should sit close to the dial, not float high above it.
how to spot a fake rolex daytona white dial
Lume plots should be round and set into the markers. A common flaw is lumpy lume or markers that sit too tall. The coronet at 12 should have five points and clean edges.
Case and bracelet
Case shape matters more than photos suggest. The lugs should curve down, crown guards should have a sharp notch, and pushers should thread in with a smooth feel. A clone with a thick case or flat lugs looks wrong on the wrist.
Check the bracelet fit at the lugs. Solid end links should sit flush with no gaps or sharp edges. The clasp should close with a firm click and the safety latch should line up. A rattly bracelet is a sign of a budget build.
Bezel
The ceramic bezel should have a deep black color, not gray. The tachymeter print should be crisp and filled with a clean silver tone. The triangle at 12 should line up with the dial center. The bezel is fixed, so it should sit flush against the case with no gap.
Movement
The best 116500 clones use a copy of the Rolex 4130. That movement keeps the correct subdial spacing and a thin case. A 7750-based build often needs a thicker case or a modified subdial layout, which changes the look and pusher feel.
Ask for a timegrapher photo. Rate, amplitude, and beat error tell you more than a seller's claim. Also ask for a video of the chronograph start, stop, and reset. The reset should snap back to zero with no creep.
What are the common tells on a 116500 white dial clone?
- Subdial spacing that sits too wide or too close to the center.
- Print that looks bold, fuzzy, or uneven under a loupe.
- Hands that sit too high above the dial.
- Bezel numbers with soft edges or a gray tone.
- Bracelet end links with gaps or sharp corners.
- Pushers that feel gritty or have long travel.
Buying checklist for the Panda Daytona super clone
- Confirm the movement type. Ask for the factory name and movement photo.
- Request close-up photos of the dial, rehaut, and clasp.
- Ask for a video of the chronograph running and resetting.
- Check the case thickness and weight against known specs.
- Ask if the watch has been water tested. If not, keep it dry.
- Buy from a seller with a return policy and clear photos of the actual watch.
FAQ
Is the white dial harder to clone than the black dial?
The white dial shows flaws more than the black dial. Print edges, dust, and subdial finish stand out against the white base. A black dial hides small issues, so a white dial clone needs better QC.
Does a clone 4130 need servicing?
Clone movements can arrive with dry pivots or debris. A service by a watchmaker who works on replicas adds cost but can improve reliability. If the watch keeps time, many owners skip it until a problem appears.
Can I swim with a super clone Daytona?
Do not assume water resistance. Case gaskets and pusher seals vary by build. Ask the seller for a pressure test result. Without a test, keep the watch away from water.
How much should a 116500 white dial super clone cost?
Price tracks the movement and finishing. A 7750 build costs less than a clone 4130 build. Spend more for correct subdial spacing, a thin case, and a bracelet that fits well. A low price often means a lower-grade movement or a case with wrong proportions.